Product Listing--2012

 

 

 
 

Orders and quotes:  sales@copperspec.com

 

 
   

Technical information:  support@copperspec.com

 

 

 
   
 

Home

 
   

 

 
   
 

 

 
   
 

 

 
 

 

Product

Description

Catalog #

High Purity™ Series DC-Arc Calibration Standards

The High Purity Series TM consists of eight (8) concentration levels:  0.10 ppm, 0.50 ppm, 1.0 ppm, 3.0 ppm, 5.0 ppm, 10.0 ppm, 20.0 ppm, 50.0 ppm  for the following ten (10) analytes (plus zinc.) 

The ten analytes (Ag, As, Bi, Fe, Ni, Pb, Sb, Se, Sn, Te)  are required for ASTM Grade I copper cathode certification. Standards are pickled and pre-cut to custom weights between 250 mg and 500 mg according to customer needs.

Set consists of: 

100 g  0.1 ppm

100 g  0.5 ppm

250 g  1.0 ppm

100 g  3.0 ppm

100 g  5.0 ppm

250 g  10.0 ppm

100 g  20.0 ppm

100 g  50.0 ppm

Purchase of a full set is not required, any concentration may be purchased at a minimum order of 100 grams.

CS-HP  

(set includes: CS-001, CS-005, CS-010, CS-030, CS-050, CS-100, CS-200, CS-500)

LME Series DC-Arc Calibration Standards

The LME Series is currently in development and will consist of eight (8) standards at the same concentration levels as the High Purity Series TM.

This series includes five (5)  analytes plus gold. These additional analytes are required for LME Grade A copper cathode certification: Co, Cr, Mn, P, Si, +Au. Standards are pickled and pre-cut to custom weights between 250 mg and 500 mg according to customer needs.

Set consists of: 

100 g  0.1 ppm

100 g  0.5 ppm

250 g  1.0 ppm

100 g  3.0 ppm

100 g  5.0 ppm

250 g  10.0 ppm

100 g  20.0 ppm

100 g  50.0 ppm

Purchase of a full set is not required, any concentration my be purchased at a minimum order of 100 grams.

 

CS-LME  

(set includes: LME-001, LME-005, LME-010, LME-030, LME-050, LME-100, LME-200, LME-500)

Copper Certified Reference Material

The copper certified reference material (CS-075™) is very useful as a standard for verification and as a daily certified check standard. The values in the copper certified reference material are derived from a major U.S. magnet wire manufacturer's material acceptance cut-off levels. It is a good replacement for the BCR ®075 which is now exhausted.

CS-075b

Contact us for pricing and ordering information.

BCR® is a registered trademark of the European Commission.

 

 

CopperSpec, Inc.

Salt Lake City, Utah

Tel: 801.414.6869  *  Fax: 801.572.2636

 

 

 

Copyright 2006-2012 CopperSpec, Inc.  All rights reserved.